The 1/2 HP Model 2802-0001 automatic submersible grinder pump is designed to remove sewage and effluent from residential sewage pits. Its oil-filled motor and cast-iron construction support heat dissipation and durability, while Tri-Slice® cutter technology helps process difficult solids. Backed by a three-year limited warranty, every pump is submerged in water and factory tested, helping deliver peace of mind right out of the box.
Have a question? Give us a call!
800-345-9422
The 1/2 HP Model 2802-0001 automatic submersible grinder pump is designed to remove sewage and effluent from residential sewage pits. Its oil-filled motor and cast-iron construction support heat dissipation and durability, while Tri-Slice® cutter technology helps process difficult solids. Backed by a three-year limited warranty, every pump is submerged in water and factory tested, helping deliver peace of mind right out of the box.
The 2802-0001 residential grinder pump is a 1/2 HP, 115V automatic submersible pump designed to remove sewage and effluent from residential sewage pits. It is an appropriate choice when the system must process materials such as toilet paper, paper towels, feminine hygiene products, and baby wipes. The pump is not intended for sump-pump service or discharge into a septic tank. Its automatic snap-action switch starts the pump at approximately 10 inches and stops it at approximately 4 inches from the base of the pump.
The pump features an oil-filled motor, cast-iron motor and pump housings, a thermoplastic vortex impeller, stainless steel cutter components and hardware, auto-reset thermal-overload protection, and a grounded plug. Its Tri-Slice® cutter uses three cutting channels to produce more than 250,000 cuts per minute. The pump delivers up to 51 GPM, has a maximum head of 29.5 feet, and uses a 2-inch NPT discharge (2-inch to 1-1/4-in adapter included). Every pump is factory tested and is backed by a three-year limited warranty.
Shipping Weight:
27 lbs
Shipping Dimensions:
Height 16 1/4 in x Width 10 1/2 in x Length 10 1/2 in.
Weight U/M:
28.00 lb / 12.70 kg
Horsepower:
1/2 HP
Hertz:
60 Hz
Volts:
115 V
Phase:
1 Ph
Discharge Size:
2″
Flow:
51 GPM (193 LPM)
Cord Length:
10' (3.1 m)
Casting:
Cast Iron
Float Type:
Snap-action
Installation Instructions
Color 1
Color 2
Color 3
Color 4
Color 5